text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Prezzo:  zł409.00
Breve panoramica:  The spring plunger exerts low forces to hold sensible parts in position.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  zł77.00
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Threa:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  zł77.00
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  10
  • Diameter:  8
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  zł142.00
Breve panoramica:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  zł202.00
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  zł43.00
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  zł43.00
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  8
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  zł361.00
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  zł112.00
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100
  • Diameter:  16
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prezzo:  zł5,160.00
Breve panoramica:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
In giacenza - Spedizione in 1-2 giorni
Kinematic Fixture Plate 300x300 mm (M8)
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
Prezzo:  zł3,505.00
Breve panoramica:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plate Compatibility :  KB-250/250, KB-UNIVL
In giacenza - Spedizione in 1-2 giorni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prezzo:  zł77.00
Breve panoramica:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Length:  6
  • Diameter:  8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Prezzo:  zł77.00
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  20
In giacenza - Spedizione in 1-2 giorni
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Prezzo:  zł4,386.00
Breve panoramica:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
In giacenza - Spedizione in 1-2 giorni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  zł5,074.00
Breve panoramica:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M4
  • Application:  Multisensor CMM
In giacenza - Spedizione in 1-2 giorni
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prezzo:  407,00 €
Breve panoramica:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Threa:  M4
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  900,00 €
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prezzo:  26,00 €
Breve panoramica:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Prezzo:  92,00 €
Breve panoramica:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Kinematic Base for Fixture Plate 500x500mm
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Prezzo:  990,00 €
Breve panoramica:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Plate Compatibility :  KPP-500/500, KPT-500/500
In giacenza - Spedizione in 1-2 giorni