Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen
  1. Home
  2. Katalog
  3. KMG
  4. Spannmittel

Spannmittel

Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Preis:  CHF600.00
Schnellübersicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Threa:  M4
Auf Lager – Versand 1–2 Tage
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Preis:  CHF18.00
Schnellübersicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  10
  • Diameter:  8
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Preis:  CHF930.00
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
Auf Lager – Versand 1–2 Tage
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Preis:  CHF33.00
Schnellübersicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Preis:  CHF47.00
Schnellübersicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Auf Lager – Versand 1–2 Tage
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Preis:  CHF10.00
Schnellübersicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
Auf Lager – Versand 1–2 Tage
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Preis:  CHF22.00
Schnellübersicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Threa:  M4
Auf Lager – Versand 1–2 Tage
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Preis:  CHF10.00
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  25
  • Diameter:  8
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Preis:  CHF1,060.00
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
Auf Lager – Versand 1–2 Tage
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Preis:  CHF27.00
Schnellübersicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Auf Lager – Versand 1–2 Tage
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Preis:  CHF22.00
Schnellübersicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Length:  10
  • Diameter:  15
Auf Lager – Versand 1–2 Tage
Kinematic Fixture Plate 400x400 mm (M8)
Kinematic Fixture Plate 400x400 mm (M8)
ID: KPT-400__400
Preis:  CHF1,470.00
Schnellübersicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plate Compatibility :  KB-300/300, KB-UNIVL
Auf Lager – Versand 1–2 Tage
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Preis:  CHF22.00
Schnellübersicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  20
  • Diameter:  16
Auf Lager – Versand 1–2 Tage
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Preis:  CHF49.00
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 250
Auf Lager – Versand 1–2 Tage
Kinematic Base for Fixture Plate 300x300mm
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Preis:  CHF660.00
Schnellübersicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Plate Compatibility :  KPP-300/300, KPT-300/300
Auf Lager – Versand 1–2 Tage
Kinematic Fixture Plate 500x500 mm (M8)
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
Preis:  1.840,00 €
Schnellübersicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plate Compatibility :  KB-400/400, KB-UNIVL
Auf Lager – Versand 1–2 Tage
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Preis:  50,00 €
Schnellübersicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Auf Lager – Versand 1–2 Tage
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Preis:  18,00 €
Schnellübersicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Threa:  M4
Auf Lager – Versand 1–2 Tage
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Preis:  18,00 €
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  50
  • Diameter:  20
Auf Lager – Versand 1–2 Tage
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Preis:  550,00 €
Schnellübersicht:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Auf Lager – Versand 1–2 Tage