text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Precio:  €91.00
Resumen:  The spring plunger exerts low forces to hold sensible parts in position.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  €15.00
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  €14.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  €31.00
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  €42.00
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  €9.00
Resumen:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  €9.00
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  €47.00
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  €23.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  100
  • Diámetro:  16
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  €1,095.00
Resumen:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 300x300 mm (M8)
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
Precio:  €779.00
Resumen:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Compatibilidad placas:  KB-250/250, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  €14.00
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  6
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Precio:  €16.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20
  • Diámetro:  20
Existencias disponibles - Envío en 1-2 días
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Precio:  €979.00
Resumen:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Existencias disponibles - Envío en 1-2 días
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  €1,800.00
Resumen:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Existencias disponibles - Envío en 1-2 días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  €259.00
Resumen:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  €884.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Precio:  €25.00
Resumen:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Precio:  €91.00
Resumen:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Kinematic Base for Fixture Plate 500x500mm
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Precio:  €832.00
Resumen:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Compatibilidad placas:  KPP-500/500, KPT-500/500
Existencias disponibles - Envío en 1-2 días