text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC

MMC

Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Precio:  CHF835.00
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Compatibilidad placas:  KB-400/400, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  CHF84.00
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  CHF26.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  100
  • Diámetro:  16
Existencias disponibles - Envío en 1-2 días
Support Stop
Support Stop
ID: FX-SUP__STOP
Precio:  CHF87.00
Resumen:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Precio:  CHF54.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20
  • Diámetro:  16
Existencias disponibles - Envío en 1-2 días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  CHF18.00
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  6
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Precio:  CHF1,810.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Precio:  CHF2,370.00
Resumen:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Existencias disponibles - Envío en 1-2 días
Vee Locator
Vee Locator
ID: FX-VEE
Precio:  CHF77.00
Resumen:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  CHF49.00
Resumen:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Tamaño:  130 x 30 mm
Existencias disponibles - Envío en 1-2 días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  CHF22.00
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  CHF1,520.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  CHF19.00
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  CHF32.00
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
Joystick for Universal Jogbox (UJB)
Joystick for Universal Jogbox (UJB)
ID: H000115
Precio:  CHF164.00
Resumen: 
3 Axis Joystick for Hexagon Universal Jogbox (UJB).
Existencias disponibles - Envío en 1-2 días
Joystick for Legacy Jogbox
Joystick for Legacy Jogbox
ID: H001404
Precio:  CHF446.00
Resumen: 
3 Axis Joystick for Legacy Jogbox.
Existencias disponibles - Envío en 1-2 días
Heavy-duty Base Plate Plain 500 x 750 mm
Heavy-duty Base Plate Plain 500 x 750 mm
ID: GB0119-2006
Resumen: 

Robust plain baseplate ideal for creating custom fixture solutions. Size 500 x 750 mm
search.facet.availability.notapplicable
Trolley System 400 x 400 mm
Trolley System 400 x 400 mm
ID: GB0120-2005
Resumen: 

User-friendly transport trolley allows users to easily transport a workpiece to the CMM using the Kinematic System. Compatible with the Kinematic System and 400 x 400 mm baseplates.
search.facet.availability.notapplicable
Manual Pallet System 400 x 400 mm
Manual Pallet System 400 x 400 mm
ID: GB0120-2000
Resumen: 

Lightweight kinematic loading system designed for efficient coordinate measuring machine operations, supporting components up to 50 kg. Pallet Size: 400 x 400 mm
search.facet.availability.notapplicable
HA-TT-A0 Angular Adapter DEG0
HA-TT-A0 Angular Adapter DEG0
ID: 03969390
Precio:  CHF940.00
Resumen:  TKJ angular adapter 0° made of aluminium and stainless steel
Existencias disponibles - Envío en 1-2 días