text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  €21.00
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Precio:  €314.00
Resumen:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  €1,060.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Precio:  €11.00
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  15
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  €479.00
Resumen:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Universal Kinematic Fixture Base
Universal Kinematic Fixture Base
ID: KB-UNIVL
Precio:  €787.00
Resumen:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Compatibilidad placas:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Precio:  €25.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  20
  • Diámetro:  16
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  €650.00
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-AB190/200F
  • Rosca:  M4
  • Previous Part Number:  FV-AB180/200F
Existencias disponibles - Envío en 1-2 días
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Precio:  €56.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 250
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Precio:  €21.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  30
  • Diámetro:  16
Existencias disponibles - Envío en 1-2 días
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Precio:  €30.00
Resumen:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 50 mm)
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Precio:  €22.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  50
  • Diámetro:  16
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  €36.00
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  €1,072.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  €547.00
Resumen:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  €21.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Precio:  €622.00
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Compatibilidad placas:  KB-250/250, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Precio:  €952.00
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Compatibilidad placas:  KB-400/400, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  €57.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  €11.00
Resumen:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días