text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC

MMC

Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  zł3,999.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Precio:  zł3,591.00
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Compatibilidad placas:  KB-400/400, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  zł142.00
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Locator
Vee Locator
ID: FV-FEMALE
Precio:  zł142.00
Resumen:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Existencias disponibles - Envío en 1-2 días
Angular Adapter Set TKJ (4 pc.)
Angular Adapter Set TKJ (4 pc.)
ID: 03969394
Precio:  zł14,147.00
Resumen:  Set of 4 TKJ angular adapters (0°, 30°, 60°, 90°) made of aluminium and stainless steel. To be used only with HP-L-10.6.
Existencias disponibles - Envío en 1-2 días
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Precio:  zł82.00
Resumen:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Vee Locator
Vee Locator
ID: FX-VEE
Precio:  zł331.00
Resumen:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 400x400 mm (M8)
Kinematic Fixture Plate 400x400 mm (M8)
ID: KPT-400__400
Precio:  zł6,321.00
Resumen:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Compatibilidad placas:  KB-300/300, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Precio:  zł1,127.00
Resumen:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Existencias disponibles - Envío en 1-2 días
Kinematic Base for Fixture Plate 300x300mm
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Precio:  zł2,838.00
Resumen:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Compatibilidad placas:  KPP-300/300, KPT-300/300
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  zł82.00
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  zł138.00
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
HR-XS-P Stylus Changer Port
HR-XS-P Stylus Changer Port
ID: M00-153-285-000
Precio:  zł1,329.00
Resumen:  Stylus changer port for HP-S-X5, HP-S-X5 HD, LSP-S2 and LSP-S4
  • Sensor relacionado:  HP-S-X5, HP-S-X5 HD, LSP-S2, LSP-S4
Existencias disponibles - Envío en 1-2 días
HA-TM-450C Probe Adapter TKJ/M8 (L = 450 mm)
HA-TM-450C Probe Adapter TKJ/M8 (L = 450 mm)
ID: 03969368
Precio:  zł8,987.00
Resumen:  TKJ to M8 adapter made of carbon fibre and stainless steel with a length of 450 mm
Existencias disponibles - Envío en 1-2 días
HA-M-100 Probe Extension M8 (L = 100 mm)
HA-M-100 Probe Extension M8 (L = 100 mm)
ID: 03969066
Precio:  zł1,131.00
Resumen:  M8/M8 extension made of aluminium with a length of 100 mm
  • Longitud (L):  100
  • Material:  Aluminio
Existencias disponibles - Envío en 1-2 días
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Precio:  zł82.00
Resumen:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Precio:  zł10,965.00
Resumen:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Precio:  zł95.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  20
  • Diámetro:  16
Existencias disponibles - Envío en 1-2 días
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Precio:  zł95.00
Resumen:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  zł211.00
Resumen:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Tamaño:  130 x 30 mm
Existencias disponibles - Envío en 1-2 días