text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

MMC

Se han encontrado 172 producto(s)

Spring Plunger

ID: FX-PLUNGER

Precio: €92.00

Resumen: The spring plunger exerts low forces to hold sensible parts in position.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Slider Block (M4)

ID: FV-SLIDER

Precio: €17.00

Resumen: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Precio: €17.00

Resumen: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Longitud: 10
Diámetro: 8

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Precio: €32.00

Resumen: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Vee Block Twin

ID: FV-VEETWIN

Precio: €46.00

Resumen: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Existencias disponibles - Envío en 1-2 días

Thumb Screw M8

ID: FX-THUMB

Precio: €10.00

Resumen: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Precio: €10.00

Resumen: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 20
Diámetro: 8

Existencias disponibles - Envío en 1-2 días

Hinge Pivot With Handle

ID: FX-PR30HINGE

Precio: €82.00

Resumen: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Existencias disponibles - Envío en 1-2 días

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Precio: €25.00

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 100
Diámetro: 16

Existencias disponibles - Envío en 1-2 días

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Precio: €1,160.00

Resumen: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Rosca: M8
Aplicación: MMC, Brazos Medición Portátil

Existencias disponibles - Envío en 1-2 días

Kinematic Fixture Plate 300x300 mm (M8)

ID: KPT-300__300

Precio: €790.00

Resumen: The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.

Compatibilidad placas: KB-250/250, KB-UNIVL

Existencias disponibles - Envío en 1-2 días

Standoff Support (M4)

ID: FV-SOSUP

Precio: €17.00

Resumen: The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.

Longitud: 6
Diámetro: 8

Existencias disponibles - Envío en 1-2 días

Standoff (D = 20 mm / L = 20 mm)

ID: FX-SO20__20

Precio: €17.00

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 20
Diámetro: 20

Existencias disponibles - Envío en 1-2 días

Pillar Kit

ID: FX-PILLAR__KIT

Precio: €990.00

Resumen: The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.

Existencias disponibles - Envío en 1-2 días

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Precio: €1,140.00

Resumen: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.