text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

MMC

Se han encontrado 172 producto(s)

HA-M-50 Probe Extension M8 (L = 50 mm)

ID: 03969065

Precio: €188.00

Resumen: M8/M8 extension made of aluminium with a length of 50 mm

Longitud (L): 50
Material: Aluminio

Existencias disponibles - Envío en 1-2 días

HA-M-200 Probe Extension M8 (L = 200 mm)

ID: 03969067

Precio: €250.00

Resumen: M8/M8 extension made of aluminium with a length of 200 mm

Longitud (L): 200
Material: Aluminio

Existencias disponibles - Envío en 1-2 días

HR-X1-P-SF Stylus Changer Port

ID: M00-114-167-000

Precio: €380.00

Resumen: Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.

Sensor relacionado: HP-S-X1S, HP-S-X1H, HP-S-X1C

Existencias disponibles - Envío en 1-2 días

Slider Block (M4)

ID: FV-SLIDER

Precio: €17.00

Resumen: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Kinematic Support Kit Plus

ID: FX-KINKITPLUS

Precio: €266.00

Resumen: The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.

Existencias disponibles - Envío en 1-2 días

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Precio: €10.00

Resumen: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 20
Diámetro: 8

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Precio: €32.00

Resumen: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Precio: €750.00

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Spring Nut (M8)

ID: FX-M8SPRGNUT

Precio: €32.00

Resumen: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Existencias disponibles - Envío en 1-2 días

Pillar Top Plate (10 x M8)

ID: FX-SUB45__120

Precio: €58.00

Resumen: The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.

Tamaño: 120 x 45 x 12 mm

Existencias disponibles - Envío en 1-2 días

Standoff Support (M4)

ID: FV-SOSUP

Precio: €17.00

Resumen: The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.

Longitud: 6
Diámetro: 8

Existencias disponibles - Envío en 1-2 días

Standoff (D = 20 mm / L = 100 mm)

ID: FX-SO20__100

Precio: €25.00

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 100
Diámetro: 20

Existencias disponibles - Envío en 1-2 días

Centering Pin

ID: FV-MALE

Precio: €23.00

Resumen: Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Standoff (D = 20 mm / L = 30 mm)

ID: FX-SO20__30

Precio: €17.00

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 30
Diámetro: 20

Existencias disponibles - Envío en 1-2 días

Universal Joint

ID: FX-UNI__JOINT

Precio: €92.00

Resumen: Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Swift-Fix - Gold Kit

ID: FX-GOLD__KIT

Precio: €2,470.00

Resumen: With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.