text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Spring Plunger
N° : FX-PLUNGER
Prix:  92,00 €
Vue d'ensemble sommaire:  The spring plunger exerts low forces to hold sensible parts in position.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Slider Block (M4)
N° : FV-SLIDER
Prix:  17,00 €
Vue d'ensemble sommaire:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Standoff Magnet  (D = 8 mm / L = 10 mm)
N° : FV-SO__MAG
Prix:  17,00 €
Vue d'ensemble sommaire:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  10
  • Diamètre:  8
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  32,00 €
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Vee Block Twin
N° : FV-VEETWIN
Prix:  46,00 €
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
En stock - Livraison sous 1 à 2 jours
Thumb Screw M8
N° : FX-THUMB
Prix:  10,00 €
Vue d'ensemble sommaire:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  10,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20
  • Diamètre:  8
En stock - Livraison sous 1 à 2 jours
Hinge Pivot With Handle
N° : FX-PR30HINGE
Prix:  82,00 €
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 100 mm)
N° : FX-SO16__100
Prix:  25,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  100
  • Diamètre:  16
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Starter Kit
N° : FX-STARTER__KIT
Prix:  1 160,00 €
Vue d'ensemble sommaire:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
En stock - Livraison sous 1 à 2 jours
Kinematic Fixture Plate 300x300 mm (M8)
N° : KPT-300__300
Prix:  790,00 €
Vue d'ensemble sommaire:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plaque adaptable:  KB-250/250, KB-UNIVL
En stock - Livraison sous 1 à 2 jours
Standoff Support (M4)
N° : FV-SOSUP
Prix:  17,00 €
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longueur:  6
  • Diamètre:  8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 20 mm / L = 20 mm)
N° : FX-SO20__20
Prix:  17,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20
  • Diamètre:  20
En stock - Livraison sous 1 à 2 jours
Pillar Kit
N° : FX-PILLAR__KIT
Prix:  990,00 €
Vue d'ensemble sommaire:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
En stock - Livraison sous 1 à 2 jours
Swift-Fix Vision - Starter Kit
N° : FV-STARTERKIT
Prix:  1 140,00 €
Vue d'ensemble sommaire:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M4
  • Application:  Multisensor CMM
En stock - Livraison sous 1 à 2 jours
Flexible Vice
N° : FV-SLIDE
Prix:  407,00 €
Vue d'ensemble sommaire:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
HR-ME3 3-Port Module for HR-MP Rack
N° : 03939486
Prix:  850,00 €
Vue d'ensemble sommaire:  3-port module compatible with HP-TM and HP-THD probe modules
  • Nombre de ports:  3
  • Comptabilité palpeur:  HP-TM, HP-THD
En stock - Livraison sous 1 à 2 jours
HR-AB Accurate Base for HR-MP Rack
N° : 03939494
Prix:  760,00 €
Vue d'ensemble sommaire:  Accurate base with accurate cylinder, accurate fixation piece and mounting equipment
  • Protection de collision:  Non
  • Recalibrage automatique:  Qui
En stock - Livraison sous 1 à 2 jours
HR-MP Accurate Base and Crash Protection Kit
N° : 03939497
Prix:  1 610,00 €
Vue d'ensemble sommaire:  Kit with accurate base and crash protection
  • Protection de collision:  Qui
  • Recalibrage automatique:  Qui
En stock - Livraison sous 1 à 2 jours
HR-SP-60 Rack Extension (L = 60 mm)
N° : 03969485
Prix:  173,00 €
Vue d'ensemble sommaire:  60 mm support pillar for a total height of 150 mm.
  • Longueur:  60
  • Diamètre:  19.5
En stock - Livraison sous 1 à 2 jours