text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

Catalogo

1.326 prodotto/i trovato/i

ID: FV-VEETWIN

Prezzo: 46,00 €

Breve panoramica: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In giacenza - Spedizione in 1-2 giorni

Spring Clamp (M8)

ID: FX-SPRING

Prezzo: 49,00 €

Breve panoramica: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

In giacenza - Spedizione in 1-2 giorni

Thumb Screw M8

ID: FX-THUMB

Prezzo: 10,00 €

Breve panoramica: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Prezzo: 254,00 €

Breve panoramica: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Compatibilità piastra di fissaggio: FV-200-200C, FV-200/200F, FV-200/200P

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prezzo: 10,00 €

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 20
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Cone Adjustable (M4)

ID: FV-CONEADJ

Prezzo: 21,00 €

Breve panoramica: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prezzo: 17,00 €

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 20
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prezzo: 82,00 €

Breve panoramica: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

In giacenza - Spedizione in 1-2 giorni

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prezzo: 750,00 €

Breve panoramica: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Prezzo: 25,00 €

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 100
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Spring Nut (M8)

ID: FX-M8SPRGNUT

Prezzo: 32,00 €

Breve panoramica: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

In giacenza - Spedizione in 1-2 giorni

Pillar Top Plate (10 x M8)

ID: FX-SUB45__120

Prezzo: 58,00 €

Breve panoramica: The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.

Dimensione: 120 x 45 x 12 mm

In giacenza - Spedizione in 1-2 giorni

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Prezzo: 1.160,00 €

Breve panoramica: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.