text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

CMM

172 prodotto/i trovato/i

Kinematic Base for Fixture Plate 400x400mm

ID: KB-300__300

Prezzo: 690,00 €

Breve panoramica: The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.

Compatibilità piastra di fissaggio: KPP-400/400, KPT-400/400

In giacenza - Spedizione in 1-2 giorni

Spring Clamp (M4)

ID: FV-SPRING

Prezzo: 45,00 €

Breve panoramica: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Cone Adjustable (M4)

ID: FV-CONEADJ

Prezzo: 21,00 €

Breve panoramica: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Spring Pusher Standoff Clamp (D=8mm / L=10mm)

ID: FV-LATSML

Prezzo: 38,00 €

Breve panoramica: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Lunghezza: 10
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Prezzo: 52,00 €

Breve panoramica: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Lunghezza: 20
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 8 mm / L = 25 mm)

ID: FV-SO8__25

Prezzo: 10,00 €

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 25
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Standoff Support (M4)

ID: FV-SOSUP

Prezzo: 17,00 €

Breve panoramica: The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.

Lunghezza: 6
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Standoff Adjustable (M8)

ID: FX-HEIGHT

Prezzo: 60,00 €

Breve panoramica: The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.

Lunghezza: 50
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 8 mm / L = 15 mm)

ID: FV-SO8__15

Prezzo: 10,00 €

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 15
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Flexible Vice

ID: FV-SLIDE

Prezzo: 407,00 €

Breve panoramica: Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Fixture Baseplate 500x500x12mm (M8)

ID: FX-BP500__500

Prezzo: 1.470,00 €

Breve panoramica: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Pillar 30x30x50mm

ID: FX-PR30__50

Prezzo: 37,00 €

Breve panoramica: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Dimensione: 30 x 30 x 50

In giacenza - Spedizione in 1-2 giorni

Standoff Pin M8 (D= 16 mm/L= 20 mm)

ID: FX-SO__PIN

Prezzo: 21,00 €

Breve panoramica: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Lunghezza: 25
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 50 mm)

ID: FX-SO16__50

Prezzo: 18,00 €

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 50
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Upgrade Pack to Standard HR-MP3-150L Rack

ID: 03939498

Prezzo: 560,00 €

Breve panoramica: Upgrade pack to standard probe module changer rack

Protezione da collisioni: No
Ricalibrazione automatica: No

In giacenza - Spedizione in 1-2 giorni

Safety Pin for HR-MP Rack

ID: 03969488

Prezzo: 52,00 €

Breve panoramica: Safety / locking pin for the 3-port probe module and arm of the rack

Lunghezza: 22
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

HR-SP-60 Rack Extension (L = 60 mm)

ID: 03969485

Prezzo: 173,00 €

Breve panoramica: 60 mm support pillar for a total height of 150 mm.

Lunghezza: 60
Diametro: 19.5

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prezzo: 900,00 €

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.