text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  77,00 zł
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Kinematic Fixture Plate 400x400mm (Plain)
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Prezzo:  2.795,00 zł
Breve panoramica:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Compatibilità piastra di fissaggio:  KB-300/300, KB-UNIVL
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prezzo:  198,00 zł
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  361,00 zł
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Prezzo:  95,00 zł
Breve panoramica:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  10
  • Diametro:  15
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prezzo:  172,00 zł
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 100
In giacenza - Spedizione in 1-2 giorni
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Prezzo:  409,00 zł
Breve panoramica:  The spring plunger exerts low forces to hold sensible parts in position.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  2.064,00 zł
Breve panoramica:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
In giacenza - Spedizione in 1-2 giorni
Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  142,00 zł
Breve panoramica:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
In giacenza - Spedizione in 1-2 giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  43,00 zł
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  142,00 zł
Breve panoramica:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prezzo:  65,00 zł
Breve panoramica:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prezzo:  258,00 zł
Breve panoramica:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Dimensione:  120 x 45 x 12 mm
In giacenza - Spedizione in 1-2 giorni
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Prezzo:  116,00 zł
Breve panoramica:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prezzo:  7.783,00 zł
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  5.074,00 zł
Breve panoramica:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M4
  • Applicazione:  Multisensor CMM
In giacenza - Spedizione in 1-2 giorni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prezzo:  2.451,00 zł
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-AB190/200F
  • Filetto / Collegamento:  M4
  • Previous Part Number:  FV-AB180/200F
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prezzo:  6.536,00 zł
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Prezzo:  211,00 zł
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 250
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prezzo:  8.170,00 zł
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni