text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
Spring Plunger
ID: FX-PLUNGER
Prezzo:  92,00 €
Breve panoramica:  The spring plunger exerts low forces to hold sensible parts in position.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  €15.00
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  €14.00
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  10
  • Diametro:  8
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  €31.00
Breve panoramica:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  €42.00
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni
Thumb Screw M8
ID: FX-THUMB
Prezzo:  €9.00
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  €9.00
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20
  • Diametro:  8
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  €47.00
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  €23.00
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  100
  • Diametro:  16
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prezzo:  €1,095.00
Breve panoramica:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
In giacenza - Spedizione in 1-2 giorni
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
Prezzo:  790,00 €
Breve panoramica:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Compatibilità piastra di fissaggio:  KB-250/250, KB-UNIVL
In giacenza - Spedizione in 1-2 giorni
Standoff Support (M4)
ID: FV-SOSUP
Prezzo:  17,00 €
Breve panoramica:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  6
  • Diametro:  8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Prezzo:  17,00 €
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20
  • Diametro:  20
In giacenza - Spedizione in 1-2 giorni
Pillar Kit
ID: FX-PILLAR__KIT
Prezzo:  990,00 €
Breve panoramica:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
In giacenza - Spedizione in 1-2 giorni
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  1.140,00 €
Breve panoramica:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M4
  • Applicazione:  Multisensor CMM
In giacenza - Spedizione in 1-2 giorni
Flexible Vice
ID: FV-SLIDE
Prezzo:  407,00 €
Breve panoramica:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
HR-ME3 3-Port Module for HR-MP Rack
ID: 03939486
Prezzo:  850,00 €
Breve panoramica:  3-port module compatible with HP-TM and HP-THD probe modules
  • Numero di porte:  3
  • Sensore compatibile:  HP-TM, HP-THD
In giacenza - Spedizione in 1-2 giorni
HR-AB Accurate Base for HR-MP Rack
ID: 03939494
Prezzo:  760,00 €
Breve panoramica:  Accurate base with accurate cylinder, accurate fixation piece and mounting equipment
  • Protezione da collisioni:  No
  • Ricalibrazione automatica:  Si
In giacenza - Spedizione in 1-2 giorni
HR-MP Accurate Base and Crash Protection Kit
ID: 03939497
Prezzo:  1.610,00 €
Breve panoramica:  Kit with accurate base and crash protection
  • Protezione da collisioni:  Si
  • Ricalibrazione automatica:  Si
In giacenza - Spedizione in 1-2 giorni
HR-SP-60 Rack Extension (L = 60 mm)
ID: 03969485
Prezzo:  173,00 €
Breve panoramica:  60 mm support pillar for a total height of 150 mm.
  • Lunghezza:  60
  • Diametro:  19.5
In giacenza - Spedizione in 1-2 giorni