text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo

Catalogo

Temperature Sensor (L = 100 mm)
Temperature Sensor (L = 100 mm)
ID: H00027388
Prezzo:  435,00 €
Breve panoramica:  Temperature sensor (L = 100 mm) for use on temperature probes for machine tools.
  • Previous Part Number:  44.00-T100
  • Compatibilità:  IRP25.50-TP , RWP20.50-G-TP, RWP20.50-M-TP
  • Lunghezza:  100
  • Diametro:  12
In giacenza - Spedizione in 1-2 giorni
Calibration Sphere Holder
Calibration Sphere Holder
ID: QUAL-SPHERE-HOLDER
Prezzo:  245,00 €
Breve panoramica:  Holder with rotary switch for M8-Cailbration Sphere V2 (03939542). for use with laser scanners for machine tools.
  • Applicazione:  Laser Tool Setter Calibration
In giacenza - Spedizione in 1-2 giorni
M4-Stylus (R-5-SS-3.5-L17.5)
M4-Stylus (R-5-SS-3.5-L17.5)
ID: H00027419
Prezzo:  54,00 €
Breve panoramica:  Straight stylus with M4 thread, ruby ball Ø5 mm, stainless steel stem, length 17.5 mm. For use on machine tools. Previous part number: 91.00-T20/5-ST-M4-D7
  • Previous Part Number:  91.00-T20/5-ST-M4-D7
  • Filetto / Collegamento:  M4
  • Materiale punta:  Rubino sintetico
  • Diametro punta (D):  5
  • Lunghezza (L):  17.5
In giacenza - Spedizione in 1-2 giorni
Battery (3 V / CR2032)
Battery (3 V / CR2032)
ID: 5309
Prezzo:  4,00 €
Breve panoramica:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Dimensione:  9 V Block
  • Tensione:  9
  • Capacity:  1200
  • Compatibilità:  IRP40.50
In giacenza - Spedizione in 1-2 giorni
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Prezzo:  356,00 €
Breve panoramica:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Materiale:  Fibra di carbonio
  • Lunghezza:  200
  • Diametro:  25
  • External Thread:  M16x1
In giacenza - Spedizione in 1-2 giorni
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Prezzo:  486,00 €
Breve panoramica:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Lunghezza:  150
  • Diametro:  25
  • External Thread:  M16x1
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Prezzo:  6.500,00 €
Breve panoramica:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  910,00 €
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  550,00 €
Breve panoramica:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  471,00 €
Breve panoramica:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
In giacenza - Spedizione in 1-2 giorni
Web based Training - Drawings - 1 day
Web based Training - Drawings - 1 day
ID: RE54T153-00039
Prezzo:  430,00 €
Breve panoramica: 

Target Group
Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals
To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites
No special prerequisites are required other than computer literacy.
Other Information
To complete the course, you need access to a computer and the internet.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
PC-DMIS CAD++ OFFLINE
PC-DMIS CAD++ OFFLINE
ID: ROY-CAD**-O
Prezzo:  10.950,00 €
Breve panoramica:  PC-DMIS Offline enables fast, convenient measurement routine programming and simulation in a fully featured virtual environment. Single User Licence.
  • Codice prodotto:  ROY-CAD++-O
  • Tipo di licenza:  Single User Licence
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
ID: ROY-CAD**-O-FLOAT
Prezzo:  13.150,00 €
Breve panoramica:  PC-DMIS Offline enables fast, convenient measurement routine programming and simulation in a fully featured virtual environment. Multi-user Licence.
  • Codice prodotto:  ROY-CAD++-O-FLOAT
  • Tipo di licenza:  Lizenz flottante
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza
Absolute Tracker Lanyard Set 1 (full)
Absolute Tracker Lanyard Set 1 (full)
ID: 576104
Prezzo:  144,00 €
Breve panoramica:  Absolute Tracker Lanyard Set 1 (full).
  • Dimensione del riflettore:  1.5"
In giacenza - Spedizione in 1-2 giorni
Inspire
Inspire
ID: SA2-INS-1
Prezzo:  11.950,00 €
Breve panoramica:  Inspire Portable Metrology software.
Includes: All hardware interfaces, Supports IGES, STEP, STL, CATIA, Solidworks, NX, ProEngineer, Inventor, and Parametric CAD import. Training class available at additional cost, and updates for 1 year. Inspire provided with license code.
  • Tipo di licenza:  Single User Licence
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza
Inspire - Annual Maintenance Agreement (SMA)
Inspire - Annual Maintenance Agreement (SMA)
ID: SA2-INS-SMA-1
Prezzo:  2.100,00 €
Breve panoramica:  Inspire single seat license annual software maintenance agreement after 12 months.
  • Tipo di licenza:  Software Maintenance Agreement (SMA)
  • Prezzo:  Per licenza
Inspire Probe
Inspire Probe
ID: SA2-INS-PRB
Prezzo:  6.950,00 €
Breve panoramica:  Inspire Portable Metrology software for portable probing devices only.
Includes: All hardware interfaces, supports IGES, STEP, STL, CATIA, Solidworks, NX, ProEngineer, Inventor and Parametric CAD import. Training class available at additional cost, and updates for 1 year. Inspire provided with license code.
  • Tipo di licenza:  Single User Licence
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza
Web based Training - GD&T - 1,5 day
Web based Training - GD&T - 1,5 day
ID: RE54T153-00032
Prezzo: 
Breve panoramica: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet. 

For more information: Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

 
Inspire Probe - Annual Maintenance Agreement (SMA)
Inspire Probe - Annual Maintenance Agreement (SMA)
ID: SA2-INS-SMA-PRB
Prezzo:  1.400,00 €
Breve panoramica:  Inspire for probing devices only single seat license annual software maintenance agreement after 12 months.
  • Tipo di licenza:  Software Maintenance Agreement (SMA)
  • Prezzo:  Per licenza
Inspire Subscription
Inspire Subscription
ID: SA2-INS-SUB-1
Prezzo:  4.200,00 €
Breve panoramica:  Inspire Portable Metrology software. 1 year subscription.
Includes: All hardware interfaces, Supports IGES, STEP, STL, CATIA, Solidworks, NX, ProEngineer, Inventor, and Parametric CAD import. Training class available at additional cost. Inspire provided with license code.
  • Tipo di licenza:  Subscription Term License
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza