text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
Kinematic Support Kit
ID: FX-KINKIT
Prijs:  €251.00
Beknopt overzicht:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Op voorraad – Verzendtijd 1-2 dagen
Pillar Base Plate
ID: FX-PR30PLATE
Prijs:  €47.00
Beknopt overzicht:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Grootte:  130 x 30 mm
Op voorraad – Verzendtijd 1-2 dagen
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  €19.00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Pillar 30x30x50mm
ID: FX-PR30__50
Prijs:  €36.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Grootte:  30 x 30 x 50
Op voorraad – Verzendtijd 1-2 dagen
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  €13.00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
Slider Block (M8)
ID: FX-SLIDER
Prijs:  €24.00
Beknopt overzicht:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Prijs:  €17.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  50
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Single
ID: FV-VEE
Prijs:  €29.00
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prijs:  €453.00
Beknopt overzicht:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad – Verzendtijd 1-2 dagen
Articulated Fixture Arm (M8)
ID: FX-ARM
Prijs:  €83.00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Prijs:  €589.00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Basisplaat comptabiliteit:  KB-300/300, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Prijs:  €263.00
Beknopt overzicht:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  €900.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  €466.00
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Op voorraad – Verzendtijd 1-2 dagen