text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prijs:  £ 1.602,48
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Prijs:  £ 14,08
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  30
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Prijs:  £ 518,32
Beknopt overzicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Basisplaat comptabiliteit:  KPP-300/300, KPT-300/300
Op voorraad – Verzendtijd 1-2 dagen
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  £ 11,44
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Prijs:  £ 17,60
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  25
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Slider Block (M8)
ID: FX-SLIDER
Prijs:  £ 21,12
Beknopt overzicht:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Pillar 30x30x200mm
ID: FX-PR30__200
Prijs:  £ 38,72
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Grootte:  30 x 30 x 200
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
Prijs:  £ 1.566,40
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Basisplaat comptabiliteit:  KB-400/400, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Silver Kit
ID: FX-SILVER__KIT
Prijs:  £ 1.426,48
Beknopt overzicht:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Prijs:  £ 14,96
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  50
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Corner Bracket
ID: FV-CNRBRKT
Prijs:  £ 43,12
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Universal Clamp (M8)
ID: FX-CLAMP
Prijs:  £ 94,16
Beknopt overzicht:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Single
ID: FV-VEE
Prijs:  £ 25,52
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Op voorraad – Verzendtijd 1-2 dagen
Tension Post (M4)
ID: FV-POST
Prijs:  £ 13,20
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prijs:  £ 398,64
Beknopt overzicht:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Prijs:  £ 14,96
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  50
  • Diameter:  20
Op voorraad – Verzendtijd 1-2 dagen
Spring Plunger
ID: FX-PLUNGER
Prijs:  £ 80,08
Beknopt overzicht:  The spring plunger exerts low forces to hold sensible parts in position.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
HA-TM-300 Probe Adapter TKJ/M8 (L = 300 mm)
ID: 03969367
Prijs:  £ 344,96
Beknopt overzicht:  TKJ to M8 adapter made aluminium and stainless steel with a length of 300 mm
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET
ID: GB-0122-1000
Prijs:  £ 5.720,00
Beknopt overzicht:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Op voorraad – Verzendtijd 1-2 dagen
ID: GB0119-2001
Beknopt overzicht: 

User-friendly transport trolley allows users to easily transport a workpiece to the CMM using the Kinematic System. Compatible with the Kinematic System and 500 x 750 mm baseplates.

search.facet.availability.notapplicable