text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
Temperature Sensor (L = 100 mm)
ID: H00027388
Prijs:  €416.00
Beknopt overzicht:  Temperature sensor (L = 100 mm) for use on temperature probes for machine tools.
  • Previous Part Number:  44.00-T100
  • Compatibiliteit:  IRP25.50-TP , RWP20.50-G-TP, RWP20.50-M-TP
  • Lengte:  100
  • Diameter:  12
Op voorraad – Verzendtijd 1-2 dagen
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Prijs:  €47.00
Beknopt overzicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diameter:  25
  • Lengte:  75
  • Materiaal:  Roestvast staal
Op voorraad – Verzendtijd 1-2 dagen
Calibration Ball Set 4                  
ID: 3D-FI EICHKUGEL SET4
Prijs:  €1,082.00
Beknopt overzicht:  Calibration set for magnetic mounting on the machine tool table. For contents, see producct description.
  • Mounting:  Magnetic Mounting
  • Sphere Diameter:  10
Op voorraad – Verzendtijd 1-2 dagen
Battery (3 V / CR2032)
ID: 5309
Prijs:  €3.50
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Grootte:  9 V Block
  • Voltage:  9
  • Capacity:  1200
  • Compatibiliteit:  IRP40.50
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Prijs:  €341.00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Materiaal:  Koolstofvezel
  • Lengte:  200
  • Diameter:  25
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Prijs:  €465.00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Lengte:  150
  • Diameter:  25
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  €900.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  €466.00
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Op voorraad – Verzendtijd 1-2 dagen
HA-TT-A0 Angular Adapter DEG0
ID: 03969390
Prijs:  €730.00
Beknopt overzicht:  TKJ angular adapter 0° made of aluminium and stainless steel
Op voorraad – Verzendtijd 1-2 dagen
HA-TT-A60 Angular Adapter DEG60
ID: 03969392
Prijs:  €730.00
Beknopt overzicht:  TKJ angular adapter 60° made of aluminium and stainless steel
Op voorraad – Verzendtijd 1-2 dagen
TLC-DIGIMATIC Cable, 2 m
ID: 04760182
Prijs:  €249.00
Beknopt overzicht: 

The TLC-DIGIMATIC cable allows users to connect TESA instruments to a computer. Length 2 m

  • Lengte:  2
  • Connector (PC / System):  Ansley 10p/f
  • Beschermingsklasse:  IP67
Op voorraad – Verzendtijd 1-2 dagen
Analogue Dial Gauge, Ø44.5, 5 mm, 0.01 mm
ID: 01419081
Prijs:  €211.00
Beknopt overzicht: 

Analogue dial gauge Ø 44.5 mm, protection class IP67. With rotating dial and adjustable tolerance marks. Resolution: 0.01 mm / Measuring range: 5 mm

  • Measurement Technology:  Analogue
  • Measuring Range:  5 mm
  • Resolutie:  0,01 mm
Op voorraad – Verzendtijd 1-2 dagen
Analogue Dial Gauge, Ø61.5, 1 mm, 0.001 mm
ID: 01419054
Prijs:  €262.00
Beknopt overzicht: 

Analogue dial gauge Ø 61.5 mm, protection class IP40. With rotating dial and adjustable tolerance marks. Resolution: 0.001 mm / Measuring range: 1 mm

  • Measurement Technology:  Analogue
  • Measuring Range:  1 mm
  • Resolutie:  0,001 mm
Op voorraad – Verzendtijd 1-2 dagen
Analogue Dial Gauge, Ø44.5, 1 mm, 0.001 mm
ID: 01419053
Prijs:  €277.00
Beknopt overzicht: 

Analogue dial gauge Ø 44.5 mm, protection class IP40. With rotating dial and adjustable tolerance marks. Resolution: 0.001 mm / Measuring range: 1 mm

  • Measurement Technology:  Analogue
  • Measuring Range:  1 mm
  • Resolutie:  0,01 mm
Op voorraad – Verzendtijd 1-2 dagen
Analogue Dial Gauge, Ø40, back plunger, 3 mm, 0.01 mm
ID: 0141760566
Prijs:  €191.00
Beknopt overzicht: 

Analogue dial gauge Ø 40 mm, protection class IP40. With rotating dial and adjustable tolerance marks. Resolution: 0.01 mm / Measuring range: 3 mm

  • Measurement Technology:  Analogue
  • Measuring Range:  3 mm
  • Resolutie:  0,01 mm
Op voorraad – Verzendtijd 1-2 dagen
TWIN-CAL IP67 Digital Depth Caliper, 500 mm
ID: 00530444
Prijs:  €648.00
Beknopt overzicht: 

Digital depth caliper with locking screw and data transmission. Resolution: 0.01 mm / Measuring range: 0 - 500 mm

 

  • Measurement Technology:  Digital
  • Measuring Range:  0 - 500 mm / 0 - 20 in
  • Resolutie:  0,01 mm / .0005 in
  • Beschermingsklasse:  IP67
Op voorraad – Verzendtijd 1-2 dagen
TWIN-CAL IP67 Digital Depth Caliper, 300 mm
ID: 00530443
Prijs:  €524.00
Beknopt overzicht: 

Digital depth caliper with locking screw and data transmission. Resolution: 0.01 mm / Measuring range: 0 - 300 mm

 

  • Measurement Technology:  Digital
  • Measuring Range:  0 - 300 mm / 0 - 12 in
  • Resolutie:  0,01 mm / .0005 in
  • Beschermingsklasse:  IP67
Op voorraad – Verzendtijd 1-2 dagen
TESA-CAL IP67 Digital Caliper, 300 mm
ID: 00530143
Prijs:  €234.00
Beknopt overzicht: 

Digital universal caliper with locking screw, without data transmission. Resolution: 0.01 mm / Measuring range: 0 - 300 mm

 

  • Measurement Technology:  Digital
  • Measuring Range:  0 - 300 mm / 0 - 12 in
  • Resolutie:  0,01 mm / .0005 in
  • Beschermingsklasse:  IP67
Op voorraad – Verzendtijd 1-2 dagen
Universal Vernier Caliper, 200 mm, 0.05 mm
ID: 00510074
Prijs:  €58.00
Beknopt overzicht: 

Robust universal vernier caliper with locking screw. Resolution: 0.05 mm / Measuring range: 0 - 200 mm

 

  • Measurement Technology:  Analogue
  • Measuring Range:  0 - 200 mm
  • Resolutie:  0,05 mm
Op voorraad – Verzendtijd 1-2 dagen
TWIN-CAL Digital Caliper, 300 mm
ID: 00530096
Prijs:  €254.00
Beknopt overzicht: 

Digital universal caliper with locking screw and data transmission. Resolution: 0.01 mm / Measuring range: 0 - 300 mm

 

  • Measurement Technology:  Digital
  • Measuring Range:  0 - 300 mm / 0 - 12 in
  • Resolutie:  0,01 mm / .0005 in
Op voorraad – Verzendtijd 1-2 dagen