text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Prijs:  € 530,00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Basisplaat comptabiliteit:  KB-250/250, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  € 32,00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  € 46,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  € 17,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prijs:  € 25,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  100
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  € 1.030,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Prijs:  € 990,00
Beknopt overzicht:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Op voorraad – Verzendtijd 1-2 dagen
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prijs:  € 407,00
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Universal Kinematic Fixture Base
Universal Kinematic Fixture Base
ID: KB-UNIVL
Prijs:  € 670,00
Beknopt overzicht:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Basisplaat comptabiliteit:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
Op voorraad – Verzendtijd 1-2 dagen
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Prijs:  € 21,00
Beknopt overzicht:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prijs:  € 1.840,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Prijs:  € 45,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Grootte:  30 x 30 x 200
Op voorraad – Verzendtijd 1-2 dagen
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  € 50,00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prijs:  € 18,00
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
Prijs:  € 61,00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  20
  • Diameter:  20
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Base for Fixture Plate 400x400mm
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Prijs:  € 690,00
Beknopt overzicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Basisplaat comptabiliteit:  KPP-400/400, KPT-400/400
Op voorraad – Verzendtijd 1-2 dagen
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Prijs:  € 135,00
Beknopt overzicht:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Prijs:  € 2.470,00
Beknopt overzicht:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad – Verzendtijd 1-2 dagen
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prijs:  € 39,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Grootte:  30 x 30 x 100
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 500x500 mm (M8)
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
Prijs:  € 1.840,00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Basisplaat comptabiliteit:  KB-400/400, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen