text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
Target D1=5 mm white uncoded (1000 pc.) (R)
ID: ART107139
Prijs:  CHF 102,00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=5 mm and D2=10 mm. Easily removable after adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  5
  • Diameter (D2):  10
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=3 mm white uncoded (1000 pc.) (P)
ID: ART107133
Prijs:  CHF 102,00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=3 mm and D2=5 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  3
  • Diameter (D2):  5
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=20 mm white uncoded (5000 pc.) (P)
ID: ART107147
Prijs:  CHF 680,00
Beknopt overzicht:  Set consisting of 5000 white uncoded measurement targets with ring diameter of D1=20 mm and D2=27 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  20
  • Diameter (D2):  27
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm retro uncoded (5000 pc.) (P)
ID: ART107127
Prijs:  CHF 1.840,00
Beknopt overzicht:  Set consisting of 5000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=10 mm and D2=13 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10
  • Diameter (D2):  13
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro coded No. 2-75 (M)
ID: ART111274
Prijs:  CHF 710,00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm retro coded No. 151-500 (M)
ID: ART111259
Prijs:  CHF 1.400,00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=2 mm white uncoded (1000 pc.) (R)
ID: ART101027
Prijs:  CHF 102,00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=2 mm and D2=3.5 mm. Easily removable after adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  2
  • Diameter (D2):  3.5
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro uncoded (1000 pc.) (P)
ID: ART107128
Prijs:  CHF 830,00
Beknopt overzicht:  Set consisting of 1000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=15 mm and D2=20 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Diameter (D2):  20
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
GKL341 Charger Pro 5000
ID: 799187
Prijs:  CHF 935,00
Beknopt overzicht:  GKL341 Charger Pro 5000
  • Systeem Compatibiliteit:  Leica Absolute Tracker AT403, TM6100A Motorized Industrial Theodolite
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Prijs:  CHF 546,00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Basisplaat comptabiliteit:  KB-250/250, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  CHF 930,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Prijs:  CHF 835,00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Basisplaat comptabiliteit:  KB-400/400, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  CHF 33,00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
ID: FV-FEMALE
Prijs:  CHF 33,00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
ID: FV-VEETWIN
Prijs:  CHF 47,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  CHF 50,00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Thumb Screw M8
ID: FX-THUMB
Prijs:  CHF 10,00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  CHF 262,00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Basisplaat comptabiliteit:  FV-200-200C, FV-200/200F, FV-200/200P
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  CHF 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  CHF 22,00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen