text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

155 product(en) gevonden

Kinematic Fixture Plate 300x300mm (Plain)

ID: KPP-300__300

Prijs: €495.00

Beknopt overzicht: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Basisplaat comptabiliteit: KB-250/250, KB-UNIVL

Op voorraad – Verzendtijd 1-2 dagen

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prijs: €31.00

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: €42.00

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prijs: €16.00

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lengte: 20
Diameter: 16

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Prijs: €23.00

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lengte: 100
Diameter: 16

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 400x400x12mm (M8)

ID: FX-BP400__400

Prijs: €1,011.00

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Schroefdraad: M8

Op voorraad – Verzendtijd 1-2 dagen

Pillar Kit

ID: FX-PILLAR__KIT

Prijs: €979.00

Beknopt overzicht: The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.

Op voorraad – Verzendtijd 1-2 dagen

Flexible Vice

ID: FV-SLIDE

Prijs: €259.00

Beknopt overzicht: Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.

Schroefdraad: M4

Op voorraad – Verzendtijd 1-2 dagen

Universal Kinematic Fixture Base

ID: KB-UNIVL

Prijs: €589.00

Beknopt overzicht: The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.

Basisplaat comptabiliteit: KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500

Op voorraad – Verzendtijd 1-2 dagen

Resting Cone (M8)

ID: FX-CONE

Prijs: €20.00

Beknopt overzicht: The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Schroefdraad: M8

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 600x600x12mm (M8)

ID: FX-BP600__600

Prijs: €1,821.00

Schroefdraad: M8

Op voorraad – Verzendtijd 1-2 dagen

Pillar 30x30x200mm

ID: FX-PR30__200

Prijs: €44.00

Beknopt overzicht: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Grootte: 30 x 30 x 200

Op voorraad – Verzendtijd 1-2 dagen

Corner Bracket

ID: FV-CNRBRKT

Prijs: €49.00

Beknopt overzicht: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Tension Post (M4)

ID: FV-POST

Prijs: €15.00

Beknopt overzicht: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Schroefdraad: M4

Op voorraad – Verzendtijd 1-2 dagen

Spring Pusher Standoff Clamp (D=20mm / L=20mm)

ID: FX-LATLGE

Prijs: €60.00

Beknopt overzicht: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Lengte: 20
Diameter: 20

Op voorraad – Verzendtijd 1-2 dagen

Kinematic Base for Fixture Plate 400x400mm

ID: KB-300__300

Prijs: €642.00

Beknopt overzicht: The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.

Basisplaat comptabiliteit: KPP-400/400, KPT-400/400

Op voorraad – Verzendtijd 1-2 dagen

Toggle Clamp

ID: FX-TOG

Prijs: €107.00

Beknopt overzicht: Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.