text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

Catalogus

1.328 product(en) gevonden

Target D1=15 mm retro uncoded (1000 pc.) (P)

ID: ART107128

Prijs: € 790,00

Beknopt overzicht: Set consisting of 1000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=15 mm and D2=20 mm. For permanently adhering to the workpiece.

Codering: Ongecodeerd
Reflectortype: Retroreflecterend
Diameter (D1): 15
Diameter (D2): 20
Bevestiging: Permanent (P)

Op voorraad – Verzendtijd 1-2 dagen

Pillar Kit

ID: FX-PILLAR__KIT

Prijs: € 990,00

Beknopt overzicht: The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.

Op voorraad – Verzendtijd 1-2 dagen

Standoff Adjustable (M8)

ID: FX-HEIGHT

Prijs: € 60,00

Beknopt overzicht: The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.

Lengte: 50
Diameter: 16

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Prijs: € 1.140,00

Beknopt overzicht: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Schroefdraad: M4
Toepassing: Multisensor CMM

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Gold Kit

ID: FX-GOLD__KIT

Prijs: € 2.470,00

Beknopt overzicht: With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Schroefdraad: M8
Toepassing: CMM, Draagbare meetarm

Op voorraad – Verzendtijd 1-2 dagen

Kinematic Support Kit

ID: FX-KINKIT

Prijs: € 254,00

Beknopt overzicht: The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.

Op voorraad – Verzendtijd 1-2 dagen

Resting Cone (M8)

ID: FX-CONE

Prijs: € 21,00

Beknopt overzicht: The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Schroefdraad: M8

Op voorraad – Verzendtijd 1-2 dagen

Pillar 30x30x50mm

ID: FX-PR30__50

Prijs: € 37,00

Beknopt overzicht: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Grootte: 30 x 30 x 50

Op voorraad – Verzendtijd 1-2 dagen

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Prijs: € 18,00

Beknopt overzicht: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Lengte: 10
Diameter: 8

Op voorraad – Verzendtijd 1-2 dagen

Pillar 30x30x200mm

ID: FX-PR30__200

Prijs: € 45,00

Beknopt overzicht: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Grootte: 30 x 30 x 200

Op voorraad – Verzendtijd 1-2 dagen

Corner Bracket

ID: FV-CNRBRKT

Prijs: € 50,00

Beknopt overzicht: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 20 mm / L = 50 mm)

ID: FX-SO20__50

Prijs: € 18,00

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.