text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Cena:  17,00 €
Szybki podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Kinematic Fixture Plate 400x400mm (Plain)
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Cena:  630,00 €
Szybki podgląd:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Kompatybilność płyty:  KB-300/300, KB-UNIVL
W magazynie — wysyłka 1–2 dni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Cena:  45,00 €
Szybki podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  82,00 €
Szybki podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
W magazynie — wysyłka 1–2 dni
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Cena:  21,00 €
Szybki podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Długość:  10
  • Średnica:  15
W magazynie — wysyłka 1–2 dni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Cena:  39,00 €
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 100
W magazynie — wysyłka 1–2 dni
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Cena:  92,00 €
Szybki podgląd:  The spring plunger exerts low forces to hold sensible parts in position.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  471,00 €
  • Kompatybilność:  HP-S-X3 Stylus Clampings
  • Średnica:  40
W magazynie — wysyłka 1–2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  32,00 €
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Cena:  10,00 €
Szybki podgląd:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  32,00 €
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Cena:  17,00 €
Szybki podgląd:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Cena:  68,00 €
Szybki podgląd:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Wymiar:  120 x 45 x 12 mm
W magazynie — wysyłka 1–2 dni
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Cena:  31,00 €
Szybki podgląd:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Cena:  2 063,00 €
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Cena:  1 345,00 €
Szybki podgląd:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
W magazynie — wysyłka 1–2 dni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Cena:  650,00 €
Szybki podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-AB190/200F
  • Gwint:  M4
  • Previous Part Number:  FV-AB180/200F
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Cena:  1 733,00 €
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Cena:  56,00 €
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 250
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Cena:  2 166,00 €
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni