text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP

WMP

Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Cena:  390,00 $
Szybki podgląd:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plaque adaptable:  KB-250/250, KB-UNIVL
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  12,00 $
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20
  • Diamètre:  16
W magazynie — wysyłka 1–2 dni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  11,00 $
Szybki podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetage:  M4
W magazynie — wysyłka 1–2 dni
Kinematic Fixture Plate 300x300 mm (M8)
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
Cena:  590,00 $
Szybki podgląd:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plaque adaptable:  KB-250/250, KB-UNIVL
W magazynie — wysyłka 1–2 dni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  8,00 $
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  25
  • Diamètre:  8
W magazynie — wysyłka 1–2 dni
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Cena:  27,00 $
Szybki podgląd:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
W magazynie — wysyłka 1–2 dni
Centering Pin
Centering Pin
ID: FV-MALE
Cena:  16,00 $
Szybki podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Filetage:  M4
W magazynie — wysyłka 1–2 dni
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Cena:  87,00 $
Szybki podgląd:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Filetage:  M8
W magazynie — wysyłka 1–2 dni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Cena:  212,00 $
Szybki podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200C
  • Filetage:  M4
W magazynie — wysyłka 1–2 dni
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Cena:  25,00 €
Szybki podgląd:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M8
W magazynie — wysyłka 1–2 dni
Vee Block Single
Vee Block Single
ID: FV-VEE
Cena:  31,00 €
Szybki podgląd:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
W magazynie — wysyłka 1–2 dni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Cena:  15,00 €
Szybki podgląd:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetage:  M4
W magazynie — wysyłka 1–2 dni
Rallonge M8 HA-M-100
Rallonge M8 HA-M-100
ID: 03969066
Cena:  219,00 €
Szybki podgląd:  Rallonge M8/M8 en aluminium d'une longueur de 100 mm
  • Longueur (L):  100
  • Matériau:  Aluminium
W magazynie — wysyłka 1–2 dni
Adaptateur TKJ/M8 HA-TM-140
Adaptateur TKJ/M8 HA-TM-140
ID: 03969366
Cena:  340,00 €
Szybki podgląd:  Adaptateur TKJ - M8 en aluminium et acier inoxydable d'une longueur de 140 mm
W magazynie — wysyłka 1–2 dni
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Cena: 
Szybki podgląd:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Référence:  FILTERKIT#15
  • Poids:  3.720
W magazynie — wysyłka 1–2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  32,00 €
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Cena:  49,00 €
Szybki podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  32,00 €
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Cena:  58,00 €
Szybki podgląd:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Taille:  120 x 45 x 12 mm
W magazynie — wysyłka 1–2 dni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Cena:  52,00 €
Szybki podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  20
  • Diamètre:  16
W magazynie — wysyłka 1–2 dni