text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC

MMC

Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plaque adaptable:  KB-250/250, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20
  • Diamètre:  16
Existencias disponibles - Envío en 1-2 días
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Resumen:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 300x300 mm (M8)
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
Resumen:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plaque adaptable:  KB-250/250, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  25
  • Diamètre:  8
Existencias disponibles - Envío en 1-2 días
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Resumen:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Existencias disponibles - Envío en 1-2 días
Centering Pin
Centering Pin
ID: FV-MALE
Resumen:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Resumen:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200C
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Resumen:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Rallonge M8 HA-M-100
Rallonge M8 HA-M-100
ID: 03969066
Resumen:  Rallonge M8/M8 en aluminium d'une longueur de 100 mm
  • Longueur (L):  100
  • Matériau:  Aluminium
Existencias disponibles - Envío en 1-2 días
Adaptateur TKJ/M8 HA-TM-140
Adaptateur TKJ/M8 HA-TM-140
ID: 03969366
Resumen:  Adaptateur TKJ - M8 en aluminium et acier inoxydable d'une longueur de 140 mm
Existencias disponibles - Envío en 1-2 días
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Resumen:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Référence:  FILTERKIT#15
  • Poids:  3.720
Existencias disponibles - Envío en 1-2 días
Vee Locator
Vee Locator
ID: FV-FEMALE
Resumen:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Resumen:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Resumen:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Taille:  120 x 45 x 12 mm
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  20
  • Diamètre:  16
Existencias disponibles - Envío en 1-2 días